CHANYA NAREE
| IDENTIFICATION | |
|---|---|
|
Flag |
Singapore |
|
Built |
03 September 2014 @ Shanhaiguan Shipyard, China |
|
Port of Registry
|
Shanhaiguan Shipyard, China |
|
Official / Class / Lloyds(IMO) number |
398803 / 142880 / 9691797 |
|
Class of vessel |
NIPPON KAIJI KYOKAI |
|
IMO Number |
9821158 |
|
MMSI |
525 100 558 |
|
Hull Number |
H002 |
| PARTICULARS OF THE VESSEL | |
|---|---|
|
Type of Vessel |
Steel Cement Carrier |
|
Light Ship |
7428.5 |
|
|
|
|
Is vessel fitted for transit of : |
|
|
a) Panama Canal |
YES |
|
b) Suez Canal |
YES |
|
c) St.Lawrence Seaway |
NO |
|
|
|
|
Is Panama deadweight affected by vessel’s bilge turn radius |
NO |
|
International |
15198 / 5541 |
|
Suez |
16830.53 / 14281.20 |
|
Panama |
12736 |
|
Length overall (meters) |
157 |
|
Length between perpendiculars (m) |
147.418 |
|
Breadth moulded (m) |
25.50 |
|
Depth moulded (m) |
13 |
|
|
|
|
Distance from waterline to top of Mechanical loading point at midship |
|
|
(a) Fully loaded condition |
4.45 |
|
(b) Full ballast condition (excluding ballast holds) |
8.45 |
|
|
|
|
State vessel’s deballasting rate in metric tons per hour |
ABT 500 M3/HR PER PUMP |
|
Horizontal Screw Conveyor Loading Point |
17.90 |
|
Highest fixed point of vessel |
43.37 |
|
|
|
|
State Capacity of : |
|
|
a) Ballast Tanks |
7710.50 M3 |
|
b) Can exchange ballast at sea |
YES |
|
|
|
|
State : |
|
|
a) Daily fresh water consumption |
ABT 10 MT |
|
b) State capacity of evaporators and daily production of FW |
ABT 16 MT |
|
c) Normal fresh water reserve* |
ABT 50 MT |
|
|
|
|
Vessel fitted with shaft generator |
NO |
|
State vessel’s on board electric supply |
3 PHASE 440V AC 60Hz, 220V AC 60Hz & 24V DC |
| CARGO ARRANGEMENT | |
|---|---|
|
Number of holds |
4 |
|
Has a loadmaster computer/Loadicator |
YES |
|
Stern to Aft discharge Boom |
61.125 |
|
Aft Discharge Boom to Forward discharge Boom |
57 |
|
Forward discharge boom to Bow |
38.775 |
|
Stern to Mechanical loading point |
88.875 |
|
Bow to Mechanical loading point |
68.025 |
|
Stern to Pneumatic loading / Discharge Manifold |
86.25 |
|
Bow to Pneumatic loading / Discharge Manifold |
70.65 |
|
Is vessel fitted with direct loading point for Cement?
If yes, advise number of holes per hatch, location and size |
YES
One each - Hold #2 & #3 |